The Gartec NP3010 part number electric vane pump offers an excellent solution for the high-performance, reliable transfer of new oil in industrial and workshop environments. This three-phase, 400V powered unit ensures outstanding flow rate and stable operating pressure for efficient fluid management.
The NP3010 model is specifically designed for the fast and efficient dispensing of new oils. The 750 W motor and robust construction guarantee long service life and continuous, high-demand operation. The 50 liter/minute flow rate makes it ideal for high-performance distribution systems where rapid filling is critical.
Main Advantages:
Nagy Áramlási Sebesség: 50 l/min capacity for fast transfer.
Reliable Operation: Robust, 750 W three-phase motor.
Optimal Pressure: Up to 6 bar operating pressure for stable dispensing.
Simple Connection: Standard 1 inch inlet and outlet connections.
This pump is excellently suited for systems that require reliable delivery of large quantities of new oil. Ideal choices include:
Vehicle repair shops and service stations
Industrial lubricant dispensing systems
Production lines requiring continuous oil supply
The detailed technical specifications of the NP3010 pump ensure compatibility and precise performance in installed systems.
| Technical Parameter | Value | Unit of Measure | Note |
|---|---|---|---|
| Part number | NP3010 | – | Gartec Identifier |
| Pump Type | Electric vane | – | Vane Pump |
| Pumped Medium | New oil | – | Primary Application |
| Flow Rate (Capacity) | 50 | l/perc | Maximum flow rate |
| Operating Pressure | 5 – 6 | bar | The description mentions 5 bar, and 6 bar is also listed in the description. |
| Power Consumption | 750 | Watt (W) | Motor power |
| Supply Voltage | 400 | Volt (V) | Three-phase mains |
| Rotational speed | 1450 | rev/min (rpm) | Nominal speed |
| Noise Level | 77 | dB | Operating noise level |
| Inlet Connection | 1 | inch | Standard Size |
| Outlet Connection | 1 | inch | Standard Size |
| Weight | 15 | kg | Net Weight |
| Packaging Dimensions | 350x280x280 | mm | Box Dimensions |
The NP3010 pump is specifically optimized for the transfer of the following fluids:
Although Gartec offers a wide range for other fluids (e.g., used oil, grease, AdBlue, water, antifreeze, air, detergents, hydrocarbons, windshield washer fluid), based on the specifications of the NP3010 model, clean, new oil is the ideal operating medium for guaranteed performance and lifespan.
The advantage of vane pump technology is that it provides a relatively constant volumetric flow rate within the operating pressure range, which is essential for precise dispensing. The pump housing and internal components are resistant to the general corrosive effects of oils, ensuring long-term reliability. The rotational speed of 1450 rpm creates an optimal balance between delivery speed and mechanical stress.
The NP3010 model represents the high-flow segment of Gartec's electric pump offerings. While other models (e.g., NP3001 9 l/min or NP3008 25 l/min) have lower performance or use gear technology, the NP3010, with its 400V three-phase system, targets the most intensive usage requirements.
The 1-inch connections allow for simple integration of standard distribution pipes and hoses, while the 750 W motor provides sufficient power to maintain a relatively high pressure of 6 bar at a full flow rate of 50 l/min. The weight of 15 kg suggests a relatively compact size for its performance, facilitating installation into existing systems or the creation of new distribution stations.
This pump is the ideal choice for any professional seeking a robust, high-capacity, electrically driven solution for the efficient and reliable handling of new oils.
