This detailed product description is for the Ardrox 9PR5 penetrant cleaner presents, which is an essential tool for revealing internal microstructure damage, cracks, and pores in metal materials, especially aluminum structures. The product is part of Wieländer+Schill's professional welding and body repair offering and is integrally linked to penetrant testing procedures.
The Ardrox 9PR5 cleaner has been specifically developed to support a critical step in the penetrant testing process. Metal components, such as automotive body parts (e.g., around MacPherson struts), often require comprehensive inspection after accidents or heavy use to rule out hidden damage that could compromise structural integrity.
The basis of penetrant testing is that the red, washable penetrant (like Ardrox 9VF2) penetrates the finest cracks and pores through capillary action. After cleaning the surface, the penetrant is drawn back to the surface with the help of the white developer (like Ardrox 9D1B), where the high contrast makes even the smallest defects visible.
The Ardrox 9PR5 cleaner plays a key role in the process: after applying the penetrant and allowing it to dwell, this agent ensures the complete removal of excess penetrant from the surface under inspection.
Residue-free Cleaning: The cleaner guarantees that the surface is completely freed from penetrant without exerting any negative impact on the welds or the inspected surfaces. This ensures the optimal result of the subsequent development phase.
Compatibility: It has been specifically developed alongside the Ardrox 9VF2 washable red penetrant and the Ardrox 9D1B developer spray, ensuring the efficiency of the entire inspection system.
Structural Safety: Enables the identification of hidden microstructural damage, which is essential for quality assurance in the structural repair of vehicles.
Area of Application: Ideal for inspecting large surfaces where the presence of cracks is critical (e.g., assessing damage after a collision).
The use of Ardrox 9PR5 strictly follows the steps of the standard penetrant testing protocol:
Preparation: The surface to be inspected must first be cleaned of general contaminants.
Penetration: Apply the red, washable Ardrox 9VF2 penetrant to the surface and allow it to dwell for approximately 10-20 minutes. During this time, the penetrant enters the cracks through capillary action.
Cleaning (Role of Ardrox 9PR5): Thoroughly clean the surface with the Ardrox 9PR5 cleaner. This step removes excess penetrant that has not yet emerged from the cracks, minimizing the chance of false indications.
Development: Apply the Ardrox 9D1B developer spray to the surface until a reaction is observed.
Inspection: Inspect the surface based on the contrast developed for identifying cracks.
The physical and logistical data for the Ardrox 9PR5 cleaner are as follows:
| Property | Value |
|---|---|
| Product Name | Crack detection agent cleaner |
| Típus | Ardrox 9PR5 |
| Part number | 311051 |
| Package Contents | 400 ml |
| Length | 64.5 mm |
| Width | 64.5 mm |
| Höhe | 200 mm |
| Field of application | Removal of penetrant residue during crack testing |
This product is found among Wieländer+Schill's wide range of welding technology and body repair accessories, ensuring professional quality, standards-compliant test results.
