This detailed product description presents the MPM saw blade developed by Wieländer+Schill, created specifically in collaboration with automotive manufacturers, offering outstanding performance when machining the most modern steels and alloys.
The MPM saw blade is designed to meet the stringent requirements of modern vehicle manufacturing, enabling the precise and efficient cutting of the hardest materials, even steels and alloys with a hardness of up to 1000 MPa. This saw blade belongs to the Separating Tools category and is the ideal complement to Air Body Saws.
To maximize the lifespan of the saw blade, especially when cutting very hard steels, the use of a suitable cutting lubricant is strongly recommended. Cutting oil is an excellent choice as it protects the saw blade from excessive heating, thus ensuring optimal cutting performance in the long term.
The precise design and excellent material of the saw blade guarantee reliable and durable operation even in the most demanding workshop environments.
| Property | Value | Note |
|---|---|---|
| Part number | 197026 | The unique identifier of the product |
| Length (L) | 100 mm | The actual length of the saw blade |
| Tooth Pitch (TPI) | 18 tpi | Teeth Per Inch |
| Material | Bi-metal | Two-component structure for durability and flexibility |
| Overall Dimensions (L x W x H) | 120 x 12 x 1 mm | Overall dimensions of the saw blade (length x width x thickness) |
| Maximum machinable hardness | 1000 MPa | Maximum tensile strength of materials processable with the saw blade |
| Field of application | Cutting of steels and alloys | Specially developed for automotive applications |
Other dimensions (Note): Although the main product is 100 mm long, the product family may contain other dimensions (e.g., 130 mm), but this specific article number refers to the 100 mm version.
The MPM saw blade bi-metal construction ensures the optimal properties of the saw blade: the teeth are extremely hard for efficient cutting, while the blade material provides sufficient flexibility to prevent breakage even under high load. This combination is essential when cutting materials with varying thicknesses and hardness levels frequently encountered during vehicle body repair.
The 18 TPI (Teeth Per Inch) pitch creates an ideal balance between fast cutting speed and a fine, clean cut surface. This dense toothing is particularly advantageous when machining thinner sheets and modern high-strength steels (HSS, UHSS), where optimal chip removal between the teeth is crucial to prevent overheating and premature tooth wear.
The product description emphasizes the cutting additive importance of use. Machining materials with a hardness of 1000 MPa causes significant thermal stress. Adequate cooling (e.g., with cutting oil) not only extends the life of the saw blade but also ensures that thermal-induced structural changes on the cut surface are minimal, which is critically important for maintaining the integrity of the body structure.
This saw blade provides outstanding performance specifically in the following areas:
Body Repair: Especially suitable for the professional separation of modern, high-strength steels (e.g., materials used in impact zones).
General metal cutting: Cutting any steel or alloy where the 1000 MPa hardness limit is not exceeded.
For pneumatic saws: Optimized for use with professional pneumatic body saws offered by Wieländer+Schill.
WS Wieländer+Schill is committed to the highest quality standards. The company holds ISO 9001 (Quality Management) and ISO 14001 (Environmental Management) certifications, which guarantee the reliability of the products and the professionalism of the manufacturing processes. This MPM saw blade was also manufactured under these strict quality control systems.
This saw blade is a premium member of the Wieländer+Schill „Separating Tools” portfolio, which offers outstanding solutions in the market for professional automotive tools.
