This detailed description refers to the Consul 0.42 SN BA model, a 4560 mm floor-installed (BA) scissor lift with an integrated auxiliary lift, offering an ideal solution for servicing and maintaining passenger vehicles. The equipment is perfectly suited for lifting vehicles with a total weight of 4,000 kg, while the built-in auxiliary lift has a load capacity of 3,500 kg.
The Consul 0.42 SN BA lift offers a combination of reliability, safety, and functionality for modern workshops. Thanks to its floor-installed (BA) design, the vehicle drive-on height is minimal, making work easier even with low-profile vehicles.
Platforms: Made from special rolled steel profiles, ensuring high stability and long service life.
Control: Electro-hydraulic control ensures a precise and smooth lifting/lowering process.
Hydraulic System: Master/Slave hydraulic system guarantees synchronized operation even under load.
Installation: Floor-mounted (BA) design, which is an ideal solution for seamless integration with the floor level.
Pneumatic Release: Pneumatically activated lock engagement via a push button during lowering for safe and easy descent.
Safety Switches: It features a separate main switch, compliant with CE directives.
Acoustic Protection: Acoustic protection in the foot protection area due to enhanced workplace safety aspects.
Mechanical Locking: 17-step mechanical locking system ensures safe positioning during lifting.
Bearing: Shared, 20 mm thick fixed and moving bearings (series-galvanized), which provide excellent durability. Can optionally be calibrated for wheel alignment.
Ramps: The platforms are equipped with approach ramps and anti-roll-back protection.
Integrated Auxiliary Lift: Extendable auxiliary wheel suspension lift on both sides (wheel free lift) for free lifting of the wheels.
Adapters: Elastomer adapters (40 mm) for safe support of the vehicles.
Jacking Beam Rails: Integrated rail system for jacking beams.
Protection and Approvals: IP 54 protection class, 230 V socket, GS certification, DIN EN 1493 and CE approval.
The table below summarizes the critical technical parameters of the Consul 0.42 SN BA scissor lift:
| Parameter | Value | Note |
|---|---|---|
| Item Number (SKU) | 731646 | |
| Manufacturer Number (HAN) | 473663 | |
| Category | Scissor Lifts | |
| Rated Capacity (Main Lift) | 4.200 kg | |
| Lifting Height (Main Lift) | ca. 2.100 mm | |
| Lifting Time (loaded) | approx. 35 seconds | |
| Set-up width | ca. 2.240 mm | |
| Installation length | ca. 5.670 mm | |
| Drive-up height | ca. 240 mm | Floor-installed version |
| Power supply | 400 V | 50 Hz |
| Drive Power | 5.5 kW | |
| Fuse Protection | 20 A slow-blow | |
| Track length (Runway width) | ca. 650 mm | |
| Platform Length (Runway length) | ca. 4,560 mm | |
| Clearance Height (SN) | ca. 50 mm | Above the surface of the runway |
| Auxiliary lift load capacity | 3,500 kg | |
| Auxiliary lift lifting height | ca. 450 mm | |
| Auxiliary lift length | approx. 1,440 – 1,940 mm | Extendable range |
| Auxiliary lift lifting time | 15 seconds | |
| Auxiliary lift width | ca. 670 mm |
Thanks to the electro-hydraulic drive, the Consul 0.42 SN BA lift ensures extremely reliable operation. The Master/Slave system guarantees that the two hydraulic cylinders work in synchronization, avoiding differences in platform level under load. The 17-step mechanical locking provides mechanical safety at every lifting position, supplementing the hydraulic system. The pneumatic locking clutch allows for fast and safe lowering, while the separately lockable main switch, compliant with CE regulations, ensures protection against unauthorized use.
The BA (Bodenaufbau – floor mounted) design results in an extremely low installation height of only 240 mm. This is particularly advantageous when lifting sports cars, low-chassis vehicles, or vehicles intended for servicing. The 4560 mm long runways (with a width of 650 mm) are suitable for accommodating most passenger cars and smaller commercial vehicles.
The built-in, extendable auxiliary lift on both sides (with a load capacity of 3,500 kg and a lifting height of 450 mm) is essential for brake, running gear, and steering repairs. The lift's fast, 15-second lifting time significantly accelerates the workflow. The extendable design (adjustable between 1,440 mm and 1,940 mm) provides flexibility for different wheelbases.
The product family can be expanded with numerous accessories that increase functionality and safety:
Galvanized Auxiliary Lift (at extra cost): The surface treatment increases corrosion resistance.
Anti-slip Coating (Not retrofittable): A coating applied to the surface of the runways that enhances grip.
Lifting and Lowering Ramps: Different length options (approx. 1,000 mm or 1,500 mm) with anti-roll-back protection.
Lifting Bridges for Frame Vehicles: Special adapters for lifting frame vehicles (up to 3,000 kg), featuring 2 movable adapters and a rotating spindle.
Leveling Set: Allows for leveling adjustment of the runways (e.g., for 650 mm wide runways, with an elevation of 50 mm).
Illumination: Optional factory-installed LED lamps for better illumination of the work area.
Fastening Material: Anchoring set for the 0.35/0.40 series (with 28 M16 anchor bolts and nuts) for professional installation.
The Consul 0.42 SN BA scissor lift is a robust, full-value lifting device that meets the highest industrial demands.
